Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
Dismiss Notice

Rozcoking23's Recent Activity

Rozcoking23 liked Ol Fogie's post in the thread Lost Oil Pressure.

Sounds like at least a removal of the timing cover to examine the gears and oil pump shaft for free movement plus clean out any metal...
May 19, 2024 at 1:24 AM
Rozcoking23 replied to the thread 1970 Jeep Rebuild.

I just read through the build thread: http://www.earlycj5.com/xf_cj5/index.php?threads/118867/page-4 I need to figure out the correct...
May 18, 2024 at 9:43 PM
Rozcoking23 replied to the thread 1970 Jeep Rebuild.

I’m hoping to be able to get this done in the JEEP, with my bad shoulder I’m kinda 1 handed and can’t do anything overhead. I just need...
May 18, 2024 at 9:36 PM
Rozcoking23 liked timsresort's post in the thread 1970 Jeep Rebuild.

Not good. Not sure why the shaft would rise up and disengage enough to strip it, if the hold down was in place. I think you can drop the...
May 18, 2024 at 9:35 PM
Rozcoking23 liked timsresort's post in the thread 44 Floater.

Picked up a nice little treasure. Dana 44 offset, 11"brakes, full floating axles with locking hubs. The price was right, so I dragged it...
May 18, 2024 at 8:58 PM
Rozcoking23 replied to the thread 1970 Jeep Rebuild.

I have a bad feeling this is gonna cause me to pull the motor and at a minimum to clean out oil passages and replacing the oil pump...
May 18, 2024 at 8:56 PM
Rozcoking23 replied to the thread Lost Oil Pressure.

The teeth on the cam gear are fine, no wear no damage. I’m thinking the distributor came unseated just enough to allow the male/female...
May 18, 2024 at 8:50 PM
Rozcoking23 attached a file to the thread 1970 Jeep Rebuild.

Well I have bigger problems….was adjusting timing and I over adjusted and the motor back fired through the carb. I heard/felt grinding...
May 18, 2024 at 8:45 PM
Rozcoking23 liked Stakebed's post in the thread What Did You Do To Your Jeep Today?.

The dreaded heater core and blower changeout.[ATTACH]change-up. [ATTACH] [ATTACH] [ATTACH]
May 18, 2024 at 8:32 PM