Have a stock ‘59 d44 geared 5.38 and looking to regear a ‘71 d44 to 5.38. Am I missing something or are the r+p’s interchangeable between these...
The same... what do you see that is leading you to your response?
Finally got some fresh air inside that diff. Does it look like anything special? Looks like an open diff to me, but as a mentioned before, both...
Thinking the truck/wagon option with 1/4” output will be my ticket and plug the 3/16” end. Thanks for confirming
been soaking, just anxious to see inside. As the tag indicates, it appears so 3.73; desirable? Run of mill? My current set has 5.38 which I’ve...
Guess what I scored this weekend? Have a fee stubborn diff cover bolts, any suggestions to break free or tools to use in case they round off?
The fitting I bought off walck’s was a Y fitting with two 3/16” output. I bought a plug anticipating using just one, but when I realized the line...
Was doing a MC swap and noticed the part(s) I bought didn’t match exactly what I had (result of buying before disassembly). Was wondering if...
Some really great replies and suggestions for improvement over my current set-up. I can attest to the bump steering both on and off the trail......
If you come across any geared 5.38 direct me to it!
the plan is to get it welded back up with some strengthening gussets to get me by. I do have the earlier Dana front end, not the 30. It may need...
I’ll have to give the Dana 30’s a look and what rocky road has to offer.
Separate names with a comma.