Could be you are smelling the discharge from the draft tube.
Are you talking about towing the Jeep on a trailer behind the T3C ? Or are you talking about flat towing the Jeep with a trailer attached to it?...
I also use the "Traveler" brand GL-1 oil from Tractor Supply Co as mentioned earlier in this thread. I use it in my Jeeps, and it is what I used...
What Donny says makes a lot of sense. Usually when I have a switch fail it means the brake lights do not come on. If the brake pedal push rod is...
Look for a NOS, good brand switch. They do show up on Ebay from time to time.
Glad you got it sorted out.
They are available from just about any Jeep parts supplier. The last ones I bought were from QTM, but I have also bought them from Classic...
On a marine engine corrosion is a larger factor than on an engine in a car, due to electrolysis softer metals like aluminum, combined with an iron...
Your best choice is to find a Jeep Dauntless flywheel and have it rebalanced neutral. I have seen them on Facebook market place usually for around...
Also, try installing the cap without the bearing being in place to make sure it is not hanging on the shoulder of the studs. Make sure you have...
Yeah, it ain't no fun, especially breaking that rear stud. Stainless studs sounds like a good idea, where did you get them?
We mostly drink corn whiskey down here in the South, that brown stuff will get you in trouble. Even so, I only use non-ethanol 100% gasoline in...
Yes, as Jw60 says use studs, and coat the threads going into the block with sealer, I prefer Permatex. The sealer does two things, it seals the...
Ken, I saw at least one good "beehive" glass in a box full of old lights out in the shed, may be more than one. There are bases and other parts...
Separate names with a comma.