Understood and not sure I didn't even process that. Based on the photos, The shock mounts look stock to me. Do most bump stops come in around 2...
Thanks guys...I guess it's best to get everything back together and then pick up the shocks.......Wheels and steering shaft are coming soon so we...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] OK, I took the 4" lift off and returned the jeep to stock height. (front shackle has +1") I...
Not sure what the PO painted it with. It is over 5 years old and holding up really well. Pretty glossy still. Was thinking POR15 but not sure....
Yep, starting from scratch. I will look into Inline Tube. As for the adjustable proportioning valve, Is that for if I switch to disks in the...
After a ton of searching, I am still unable to find a correct answer to what I need. I read mid 74 used one but not sure what I need for an all...
Good eye on the spring hanger! I have new leafs going on soon but once heard the intermediates suffered from this and needed a shim. Pictured set...
Thanks guys..I guess a little back story would have helped. Picked this CJ5 up as a project and the T18 was already there. Sandblasted straight...
Going for bone stock, narrow steelies....Not a wheeler, just a Socal, PCH cruiser..... I talked to the guy at Novak today. Really liked his...
Don't mind the rusty tranny drop spacers. They are coming off and I'm going back to stock leafs......
Starting to source drive train parts on my build. I am missing several linkage parts to the clutch and wondering if I should just go hydraulic....
Did you guys with the CJ5's run a standard drive shaft or double Cardan type. Wondering what I could get away with just swapping the shackles for...
Separate names with a comma.