Thanks Vanguard. I'll take a trip to napa
Ok great thanks for the info
Yes it is held down be screw claps here's a picture. [IMG]
I really haven't found any listing for it in any of the mallory catalogs that I've seen either. i have seen the part number mentioned though in...
Ok thanks,mine also is a mechanical advance only. Do you know what the part number is of your distributor and the cap and rotor part number. thanks
It's a 2562901 so i believe it's a 23 series. what cap and rotor numbers are you using maybe they'll inter change. thanks
I've got mallory distributor on my 225 and need to replace the cap and rotor. I checked with Mallory and they say they no long make the cap and...
[IMG]
original 69 cj 5 emblem glued on no studs [IMG]
look up at the cowl from the inside and see if the po did not fill in the original hole. if there was no center nozzle then probably your 69...
[IMG] [IMG] couple of 71's
you might here; http://www.rockauto.com/catalog/catalog.php and search for part number 399204. good luck.........................
Separate names with a comma.