The seal is installed from inside the timing cover. This means the timing cover has to come off. The timing cover also bolts to the oil pan....
I'm not familiar with the 50's vintage but in the 70s they were called the heavy duty option on the rear end. I would take a ford 9 in over the...
The hole pattern on the bearing pocket flange surface changed half way through 1970. Your 67 housing has 6 equal spaced holes and the 71 housing...
Mopar project cj66 had that spot filled with air pressure gauge and switch for onboard air system. You might be able to add a chuck as well. If...
I believe that most hydraulic clutch kits are made for later pedals that come off the firewall. I ran across this some time ago and it may be...
Mr. Timgr is correct. My 71 jeepster had factory manual saginaw box bolted to the front of the frame.
The polarity of the coil is for sure different. I noticed this on my commando when I did the HEI swap. HEI's EXPOSED
Separate names with a comma.