got a plow today

worked when removed off a 70's cj5 some years ago.





Its a meyers. I have some brackets with it but i dont know much about these setups. Im wondering what part # the belt would be. I havent looked up any parts sources yet.

 

thinking this will fit on the 3a. 17 inches between the side to side pistons. if not...it was free to borrow. i hope i can get the motivation to get it to work.

 

Power angle, too!! Good for you. Beats the manual angle set up.

 

wow I'm totally jealous! nice find

 

i think the belt is the last thing you need to worry about lol. lots of rust there but it looks like a score

 

my 3b had i different setup on it. it had angle iron that ran all the way from the front, to the back of the frame and it was also a fisher. but really nice find it beats my manual angle lol

 

The plow is a Meyer, but the pump is not. Valve body looks like a Fisher. Meyer mounts should be three pieces, I can see one side on top of the plow in the third pic. Two side pieces that bolt to the frame that are tied together with the plow mounting piece. You'll have to mount that pump and measure for a belt, no book will tell you what you need.

 

That is a Meyer ST moldboard but, on my rig, the hydraulic up/down and power angle rams are contolled electrically via solenoids. What you have pictured is clearly belt-driven.....never seen a setup like this before. I think you have a "mutt" of components from different manufacturers. But, it may work great...keep us posted!

 

The pivot points are all rusted pretty bad and it will need all new lines. I dont know if the correct brackets are there for mounting it to a l-head. I dont think im going to end up using it. why bother with the jeep when theres a dodge diesel to use.

 

I'll take it off your hands!

 

X2!!!!!

 

I have a Fisher plow blade that is sitting in western mass. I have no need for it in Florida! It came off my FC-150. If anyone needs it let me know.

 

your going to be eating those words with all the freezing you guys have been having lol

 

Wingtime, sent you a PM