1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rebuild kit for Dauntless 225 - where?

Discussion in 'Early CJ5 and CJ6 Tech' started by hansom, Mar 31, 2009.

  1. hansom

    hansom New Member

    Can't find one. Where do you go for master kits? Hopefully closer to San Diego )and cheaper) than Kanter :)
     
    hansom, Mar 31, 2009
    #1
  2. burnzee

    burnzee 46 CJ2A 225 oddfire

    I got my gasket kit, and new clutch, from Autozone. I let the machine shop purchase the new pistons, rings, and bearings.
     
    burnzee, Mar 31, 2009
    #2
  3. w3srl

    w3srl All-around swell dude Staff Member

    Just about any FLAPS can order what you need, and LOTS cheaper than Kanter.
     
    w3srl, Mar 31, 2009
    #3
  4. Vanguard

    Vanguard Take Off! Staff Member

    If you do a search, autozone used to carry a master rebuild kit that was very reasonable. I want to say the vendor was Hi-tech.
     
    Vanguard, Mar 31, 2009
    #4
  5. Vanguard

    Vanguard Take Off! Staff Member

    Vanguard, Mar 31, 2009
    #5
  6. hansom

    hansom New Member

    I just called my Autozone, and they said 'no dice'. So something changed with hitech. I searched the hitech site, and it came up with nothing for that kit, and many other jeep kits. I'm waiting for a response from them.

    w3, What's a FLAPS?
     
    hansom, Mar 31, 2009
    #6
  7. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Friendly Local Auto Parts Store
     
    timgr, Mar 31, 2009
    #7
  8. hansom

    hansom New Member

    Yeah, i've tried all those. There's one - a specialty antique parts shop - i havent' called yet, and they're my last hope for something local. Otherwise, i'll probably have to go to arizona for kits
     
    hansom, Mar 31, 2009
    #8
  9. captain cj

    captain cj Member

    Try whoever is doing your machine work. One, the parts will all be correct.Two, you might get a better deal. My machine shop ordered all my parts for the rebuild and gave me a killer deal. Worth a shot!!!!!!!!!!!!!!!!
     
    captain cj, Mar 31, 2009
    #9
  10. hansom

    hansom New Member

    Meaning, they got you parts, and you did the rebuild?
    Or they gave you a deal on parts + labor when they did the job?
    Doing it myself is better, but I'll definitely check with my mach shop
     
    hansom, Mar 31, 2009
    #10
  11. captain cj

    captain cj Member

    They got me the parts and did the machine work/ Block/ Heads. I did the rebuild
     
    captain cj, Mar 31, 2009
    #11
  12. Harold W.

    Harold W. Member

    You are going through what most us have already been through---a younger person on the counter that does not or can not go to the old fasion paper books and look up the parts. Usually--any vehicle over 10 years old are droped from the computer--the parts are out there.
    Go on line to all the major parts places O'Reilys, RockAuto, Auto Zone ect and put in your jeeps info and you will find the parts needed--some of the parts however, you will need to call the store for a price. Once you have a part number in hand, all they have to do is type it into the computer to see how much it is and how long it will take to get it.
    Simple--No
    Doable--Yes.
    Good luck!!
     
    Harold W., Apr 1, 2009
    #12
  13. bergy9

    bergy9 Jeep Maffia, CJ 5 Chapter

    I know NAPA has them.
     
    bergy9, Apr 1, 2009
    #13
  14. BDL67

    BDL67 Brad79

    i just saw some on ebay
     
    BDL67, Apr 5, 2009
    #14
  15. hansom

    hansom New Member

    I'm a little ebay-challenged. Want to post the links?
     
    hansom, Apr 5, 2009
    #15
  16. rancerox

    rancerox New Member

    master rebuild kit for 225 can be found at TA perfomance (just google it) cant remember the price at this moment
     
    rancerox, May 26, 2009
    #16