1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

what jeep do i have

Discussion in 'Flat Fender Tech' started by hotrod351, Dec 26, 2006.

  1. hotrod351

    hotrod351 Member

    well i need to replace my windshield and cant figure out what jeep i have. the top of the windshield from to the top of the hood is 25 inches but i have the windshield wipers mounted on the bottom and its a one piece windshield. best i can figure is its a cj2a. i need to get the windshield and new moulding so i want to make sure i get the right one. any thoughts on where to buy the windshield and moulding.
     
  2. neptco19

    neptco19 That guy....

    Sounds like a 3a windshield. 2a windshields were split down the middle.
     
  3. jeep2003

    jeep2003 Well-Known Member

    theres a few sights you can look up your firewall serial #. then you will know for sure. as long as its the original windsheild
     
  4. hotrod351

    hotrod351 Member

    well i called a local shop and they said they could match it by the actual size of the windshield itself. i know a lot of the older jeeps had a lot of parts interchanged on them.
     
  5. jeep2003

    jeep2003 Well-Known Member

    i just took my inner frame to a glass shop and they used there own gaskets. i made mine a split windsheild i dont know if it came factory like that or not but it was 1 piece when i got it. its a 46 cj2a
     
  6. hotrod351

    hotrod351 Member

    i like the look of the two piece myself, i have a 55 M38A1 with the two piece windshield. i think all military vech. came with the two piece windshields.
     
  7. Patrick

    Patrick Super Moderator Staff Member

    No. The M38's had a one piece, same as the 3A.....And 3B