1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What is it?

Discussion in 'Flat Fender Tech' started by Andy4802, Aug 12, 2006.

  1. Andy4802

    Andy4802 Canadian Jeep junkie

    so here are the pics as promised... note the wraparound rear of the tub with no tailgate... single gauge dash.. and shorty windshield (i still think its from a 3b).

    could this be a DJ-3A on a frame from a CJ-2a-3a-3b?

    oh yeah... check it out, i cut off the extra sheet metal on the grill and fenders i was talking about in that last thread
     
  2. mccjdj

    mccjdj New Member

    dj3a, placement of emergency brake handle is a dead givaway, they have installed a cj2a dash data plate, M-series Light SW??,
    might be an early(mid to late 50s) dj if that is original speedo, acct it is the King Seely which was the early one used in the DJ
    the frame may or may not be a dj frame, one way to check to see is placment of gas tank (rear end with no K bar bracing) and the dj frames are stamped with serial number in 2 places along top of frame rail on Pass side
     
  3. sparky

    sparky Sandgroper Staff Member Founder

    :iagree:
     
  4. runnamuck

    runnamuck look out!

    someone put some time in that thing. dj3a to that. the mili light sw is cool but placement is kinda akward. looks alot better with the gills gone off the grill. keep it up.
     
  5. scottz1946cj2a

    scottz1946cj2a New Member

    OK, that 2A looks BAD! I am getting ready to start on mine.....how much lift does it have...etc.......I am truly inspired!........please let me know