1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1/3 2/3 Bench Seat Or 60/40

Discussion in 'Early Jeep Restoration and Research' started by Mopar_tim, Jul 16, 2016.

Page 2 of 2
  1. Glenn

    Glenn Kinda grumpy old man Staff Member

    Do the seat backs on your seats fold?
     
    Glenn, Jul 26, 2016
    #21
  2. Mopar_tim

    Mopar_tim New Member

    Not the driver side, the passenger side folds and then tilts to get to the tool box
     
    Mopar_tim, Jul 26, 2016
    #22
  3. Glenn

    Glenn Kinda grumpy old man Staff Member

    As mentioned by Mayday, making a jump seat is worth thinking about. If you make one with a folding back that would be better yet. An upholstery shop could make you a seat cushion that would fit snug and the same with the back, plus you wouldn't have to mess with the original bucket seat.
     
    Glenn, Jul 26, 2016
    #23
  4. mayday

    mayday Sponsor

    mayday, Jul 26, 2016
    #24
  5. Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Some of them do. The set I have stored in my shop permits folding of the passenger and driver seat backs. Only the passenger seat permits the entire seat to fold forward for entry to the back seat.
     
    Chris Insull, Jul 29, 2016
    #25
  6. jeepermc

    jeepermc Active Member

    The back of my 2/3 folds and the 1/3 folds and tumbles.
     
    jeepermc, Jul 29, 2016
    #26
Page 2 of 2