Looking for a winch setup for my 1954 M38A1

[rvrana]

Guys
I am looking for a winch setup for my 24 volt 1954 M38A1. My research says that the only setup that works with a military M38A1 is the Ramesy 50 or 50R winch and the M105 PTO. Are there other period type units that will fit on my M38A1 and do you know where I can get a Ramesy or any other units that will fit?

Any suggestions would be appreciated.

Ralph V
1954 M38A1

 

[Howard Eisenhauer]

The M50 PTO's are rare, hence $$$. Never used on CJ's so probably no one here has one.

yes other options exist, RamseyM200, Koenigs and a few others are out there & show up here & other places from time to time, they should fit.

 

[Jw60]

I would put a 24v motor on a bellview winch and put a brown paper bag over it.

 

[PeteL]

The OEM GI winch setups can be found but at astronomical prices. If authenticity can be compromised it would be better to adapt a more common model which can be had for under $1K.

 

[PeteL]

I would put a 24v motor on a bellview winch and put a brown paper bag over it.

Better put another bag over your own head in case the other one falls off.

 

[colojeepguy]

put a brown paper bag over it.

Better put another bag over your own head in case the other one falls off.

I used to date a girl like that...

 

[Willys_Addict]

Guys
I am looking for a winch setup for my 24 volt 1954 M38A1. My research says that the only setup that works with a military M38A1 is the Ramesy 50 or 50R winch and the M105 PTO. Are there other period type units that will fit on my M38A1 and do you know where I can get a Ramesy or any other units that will fit?

Any suggestions would be appreciated.

Ralph V
1954 M38A1

Depending on how deep your pockets are, I know a guy that has model 50 Ramsey winch and will be getting the correct 105a pto for it.

 

[rvrana]

Depending on how deep your pockets are, I know a guy that has model 50 Ramsey winch and will be getting the correct 105a pto for it.

 

[rvrana]

I am not sure I can afford it but if you can hook me up that would be great.

 

[rvrana]

The OEM GI winch setups can be found but at astronomical prices. If authenticity can be compromised it would be better to adapt a more common model which can be had for under $1K.

 

[rvrana]

Petel
What do you reccomend for more common models?

 

[PeteL]

Petel
What do you reccomend for more common models?

I've had several Koenig ("King") winches on my jeeps, but I have no reason to think Bradens wouldn't be just as good.

Be advised that the PTO take-off is clocked differently on the trucks, versus CJ. And before you write a check be sure the clutch handle/brake assembly works - many have been wrecked by escaped loops of cable crushing them.

 

[dozerjim]

I have a Koenig winch and PTO from a cj5 that needs a home,Im in WNY if you want to take a look,PM me

 

[Jay's WWII Jeeps]

The Ramsey civilian PTO winch will work great in your jeep and can be had for a lot less. I have a couple in Napa CA if interested.
Jay