Transfer case id

[jeepstar]

Thought it was a dana 18, it may be but I can't find DANA anywhere.
It's attached to a t14A.
There's no drum brake on it.
It's twin sticked.
The tab for the isolator bushing does not have a mating surface for it to attach to the cross member.
It's full of oil and does not leak.

 

[timgr]

Can only be a Dana 18.
The brake parts have been removed.
There is nothing else but the Quadratrac that has an offset like that.

 

[colojeepguy]

Wel it's an 18 for sure. Odd that it doesn't have a Spicer or Dana logo. Also odd that it appears to be a small hole case, mated to a T14.

 

[47v6]

Brown Lipe, subsidiary of Dana, made these early on and would have had a tag riveted to the top. 1 1/8 intermediate shaft. Will work fine until it doesn't.

 

[RimBenty]

I did a search for the casting number and found it listed in an Army parts manual.

https://www.steelsoldiers.com/upload/M38/ORD_SNL_G-740.pdf

It is on page 199, under manufacturers part number for - case, transfer.