• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
C

CHUGALUG

Member 68 From Silverton, OR
Joined
Last seen
Messages
288
Reaction score
647
Points
93

Latest activity Postings About

    • C
      CHUGALUG replied to the thread On Board Air?.
      I'm much happier with my Viair 400c mounted to the frame on my 2A between the starter and the fender
    • C
      CHUGALUG replied to the thread WMS to WMS - All the Jeeps!.
      On the 2A through early 5 the numbers given in the post are Tread not WMS to WMS Tread is the measurement of the center of the tire to...
    • C
      CHUGALUG replied to the thread 1974 CJ5 Steering Too Sensitive – Looking for Advice.
      Summit racing has more then a dozen various Caster shims Steel and Aluminum from 1 to many degrees.
    • C
      CHUGALUG replied to the thread For Sale Flanged 44.
      I bought a 30 spline housing axle shafts and rear cover. Then put all new G2 gears and install kit with SKF bearings and an Eaton...
    • C
      CHUGALUG replied to the thread JD squared tube bender, swag HF air over hydraulic ram.
      I am really lucky in that not far from me is a great guy who builds race car chassis and stuff for the Hot Rod guys and he has a great...
    • C
      CHUGALUG replied to the thread Saturn/Warn Overdrive.
      If you have a hard time dealing with Herm then when you call ask to talk to Adam his son who knows pretty much everything and has much...
    • C
      CHUGALUG replied to the thread Saturn/Warn Overdrive.
      My thoughts on the OD (I currently run one of Herms 30% units) If you have a less then fresh engine (lower compression) or taller then...
    • C
      CHUGALUG replied to the thread Happy place camping, jeep trailer.
      I went a different route. With less then 80 HP I wanted a trailer that added as little drag as possible. 500 lbs empty 800-825lbs...
    • C
      CHUGALUG replied to the thread Excess fuel tank pressure.
      I have a Holley Red fuel pump with a low pressure Holley 1-4psi regulator and all -6AN fittings and Braided lines. The regulator has no...
    • C
      CHUGALUG replied to the thread Radio install under glove box.
      I went with a Pioneer Digital Receiver no tape or CD deck but it does have Blue tooth and input from a USB drive. Then a pair of Pioneer...
    • C
      CHUGALUG replied to the thread Converting A Cj2a Into A Truck.
      I assume your intentions are to trailer this marvelous beast on the road. Cause around here you would be getting pulled over all the...
    • C
      CHUGALUG replied to the thread oil pressure issues.
      FIRST THING TO DO IS get a new OIL Gauge. I suggest a STEWART WARNER DELUXE MECHANICAL Gauge.
    • C
      CHUGALUG replied to the thread Electric fuel pump.
      One of the key things to remember about an electric pump is they are pushers not suckers. SO you have to mount them as close to the...
    • C
      CHUGALUG replied to the thread Passenger Grab Bar.
      Rather then the dash mounted bar which forces the passenger to lean forward placing their head closer to the windshield. I put grab bars...
    • C
      CHUGALUG replied to the thread Question on Saginaw steering boxes.
      Or to get less effort is with a shorter pitman arm.
    Show older items
  • Loading…
  • Loading…
Back
Top Bottom