• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
47v6

47v6

2022 Sponsor 2023 Sponsor 2025 Sponsor 2026 Sponsor
junk wrecker! From USA
Joined
Last seen
Messages
5,993
Reaction score
5,755
Points
113

Latest activity Postings About

    • 47v6
      47v6 reacted to duffer's post in the thread 1963 Us Navy Dj-3a with Like Like.
      The left spout is the same one I use in the 3B. Dang, you got that with Old Blue and kept it??? The disadvantage of those is when...
    • 47v6
      47v6 reacted to Fireball's post in the thread 1963 Us Navy Dj-3a with Like Like.
      Little things these days. The driver side rear-dump exhaust is somewhat close to the master cylinder and brake lines, so a heat shield...
    • 47v6
      47v6 reacted to sterlclan's post in the thread The new and improved Pete with Like Like.
      Started the twin stick by drilling one of the shifters out to fit the pin in the transfer case it fits kinda like this it will need...
    • 47v6
      47v6 replied to the thread Langmuir Crossfire XR Plasma table.
      This is the FireControl interface that controls the plot points and moves the torch. Today I created an account and downloaded files...
      • IMG_1517.jpeg
    • 47v6
      47v6 replied to the thread Langmuir Crossfire XR Plasma table.
      I have a need for custom parts for manufacturing tooling. I can’t get anyone to make any prototyping, so I have to make it myself. This...
    • 47v6
      47v6 reacted to ITLKSEZ's post in the thread Made a gear to fix the lathe at work with Like Like.
      There were 127 teeth on that gear. The router bit had exactly 119 clean cuts in it. It basically melted its way through the last eight...
    • 47v6
      47v6 replied to the thread Langmuir Crossfire XR Plasma table.
      Bought the year subscription to fusion 360… yeah, you can’t own it. Anyway, I guess I need to read a book on it, buy a mouse for my Mac...
    • 47v6
      47v6 reacted to ITLKSEZ's post in the thread Made a gear to fix the lathe at work with Love Love.
      When I started at this job, the lathe was in bad shape. I’ve spent countless hours cleaning it, removing gear lash, and getting...
    • 47v6
      47v6 reacted to timsresort's post in the thread Ol Yeller with Haha Haha.
      So Howell hasn't reach out to you regarding a spokesman gig? That's weird.
    • 47v6
      47v6 reacted to Norcal69's post in the thread Ol Yeller with Like Like.
      Maryland license plates arrived for Old Yeller so I thought I'd install them and go for the first official road test. Rich ran out of...
    • 47v6
      47v6 reacted to Fireball's post in the thread 1963 Us Navy Dj-3a with Like Like.
      A bunch of small stuff. The retaining walls for the under seat storage are done: I added an additional 12V power port and some USB...
    • 47v6
      47v6 replied to the thread Langmuir Crossfire XR Plasma table.
      both
    • 47v6
      47v6 posted the thread Langmuir Crossfire XR Plasma table in Builds and Fabricators Forum.
      Late last year I bought a Langmuir Crossfire XR plasma table. https://www.langmuirsystems.com/xr I quickly realized that It was too big...
      • IMG_1508.jpeg
    • 47v6
      47v6 reacted to ITLKSEZ's post in the thread Varg In Jeep's Clothing with Like Like.
      We went camping over the weekend… …and finally got the chance to give the jeep a proper flogging. I’m happy to report that everything...
    • 47v6
      47v6 reacted to Norcal69's post in the thread Starting over on my CJ3B with Like Like.
      Exactly. From the factory the fuel lines have connections down inside the frame rail that allow you to harvest the section that runs up...
    Show older items
  • Loading…
  • Loading…
Back
Top Bottom