• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
dnb71R2
Reaction score
7,509

Latest activity Postings Media Albums About

    • dnb71R2
      dnb71R2 reacted to OzFin's post in the thread Amazon budget Rear hub puller with Like Like.
      I can tell you that the Amazon picture of the puller attached to an axle with grass in the background was a picture I took and posted on...
    • dnb71R2
      dnb71R2 reacted to Keys5a's post in the thread 81 CJ7 with Like Like.
      I think that “some rust” is an understatment. It looks like lots of bondo all along the sides. If you’ve got a donor tub, it might be a...
    • dnb71R2
      dnb71R2 reacted to SIDSCJ's post in the thread WTB Steering wheel with Like Like.
      "I see people turn their heads and quickly look away, Like a newborn baby it just happens every day'
    • dnb71R2
      dnb71R2 reacted to timgr's post in the thread Putting a T18 behind an AMC engine with Like Like.
      Crown (?) used to make these - Jeep PN 3228248 I'd think you could find an OEM one for much less than the AA price. Looks like J&W has...
    • dnb71R2
      https://www.advanceadapters.com/4883
    • dnb71R2
      dnb71R2 reacted to duffer's post in the thread WTB Steering wheel with Like Like.
      "And I want it painted black No colors anymore I want them to turn black"
    • dnb71R2
      dnb71R2 reacted to Beach66Bum's post in the thread Selling parts on Ebay with Like Like.
      Ack! Crappy that even the small amount of money you make, they want a piece!
    • dnb71R2
      dnb71R2 replied to the thread Disc brake swap.
      I've said it before, and I'll say it again...the 2 bolt caliper brackets are still a fantastic upgrade over any drum. I used all '82...
    • dnb71R2
      dnb71R2 reacted to Jon B.'s post in the thread Disc brake swap with Like Like.
      That is likely the “six-bolt knuckle” set for a Jeep. The calipers are smaller than what’s on the D44 Scout axle, and look similar to my...
    • dnb71R2
      dnb71R2 reacted to Keys5a's post in the thread 83 Scrambler Project - CO with Like Like.
      Both engine and transmission, full exhaust , etc on the photos, but not included?
    • dnb71R2
      dnb71R2 reacted to timgr's post in the thread Dana 27 Question? with Like Like.
      Yes. Pretty sure the idea is to keep the angle of the pinion down at full compression and prevent smacking the starter with the drive shaft.
    • dnb71R2
      dnb71R2 reacted to Fireball's post in the thread Dana 27 Question? with Like Like.
      In 1971, they switched to these snubbers welded to the frame that hit the springs behind the axle. And on both sides, not just the...
    • dnb71R2
      dnb71R2 replied to the thread Dana 27 Question?.
      If anybody wants one of these snubbers, send me a DM. It's yours for price of postage. I cut that off my '71 D27 when I swapped to D30...
    • dnb71R2
      dnb71R2 reacted to supertrooper's post in the thread Dana 27 Question? with Like Like.
      I believe its to keep the axle/driveline from hitting the larger v6 motor
    • dnb71R2
      dnb71R2 reacted to Beach66Bum's post in the thread Rare holley buick v6 with Like Like.
      To add when buying off FB or other selling sites, use PayPal with the “goods and services” though! You are not covered with the...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top