-
-
ScottInAZ replied to the thread 1959 Cj-5 302 Swap. Help Me To Help Myself.......tailgate hinges are fabricated, and the tailgate is ON. I am still waiting for the hinges I ordered off Ebay to arrive, but I didnt want... -
I made tailgate cables. My suggestion if you use cables is to have the crimped end on the hook and the u-bolts and saddles on the...
-
Just measured mine and it’s about 17 1/2 long from connection to end of hook. 1964 CJ5 Yes, that is still the original plastic...
-
as the title says, tailgate chains... how long are they usually?..... I COULD buy a set already made from DurkaDurkastan, but like my...
-
With some paint and some rubber tape, the shovel is snug and doesn't rattle: Another pre-Rubicon item is something to keep the tool...
-
ScottInAZ replied to the thread 1959 Cj-5 302 Swap. Help Me To Help Myself.......well, tailgate and hinges are ordered... got the tailgate on scAmazon, so it should be here this week, the hinges I got off Ebay.... and...
-
ScottInAZ replied to the thread GM 4.3 front of engine chirping or squeaking.one way to test it is spray a bit of brake cleaner or WD-40 on the belt.. if it shuts up, then thats your issue. nobody seems to make...
-
ScottInAZ replied to the thread What riv nut tool are you guys using?.once you have one, you will wonder how you ever did without it... makes mounting things to sheetmetal MUCH easier
-
ScottInAZ reacted to Howard Eisenhauer's post in the thread What riv nut tool are you guys using? with
Like.
I use one of these kits, works very well but only goes to 1/4" -
ScottInAZ replied to the thread What riv nut tool are you guys using?.thats very similar to the Doyle that HoboFreight has... only yours comes with more mandrels.
-
I've put in close to a hundred Rivenuts with this tool from Amazon. Not great for tight spaces, but it's worked well for me...
-
You may need one of these yet.
-
ScottInAZ replied to the thread 1963 Us Navy Dj-3a.love that rack, and yeah, the 50 cal can makes for a GREAT waterproof compartment for paperwork and other stuff you need out of the...
-
ScottInAZ replied to the thread What riv nut tool are you guys using?.its not for tight spots, but I use the Harbor Freight one. Put in a bunch of the rivnuts when I redid the trans tunnel and firewall (so...
-
ScottInAZ replied to the thread 1959 Cj-5 302 Swap. Help Me To Help Myself.......and finally, I put a hitch on the back.... I was anticipating this being a huge PITA, but it wasnt bad really. I thought it hung lower...
-
-
Loading…
-
Loading…
-
Loading…