1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Worth Saving This Steering Box?

Discussion in 'Early CJ5 and CJ6 Tech' started by garage gnome, Jun 1, 2020.

  1. Jun 1, 2020
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,092
    I have this rusted out junk f350 from the late 60's early 70's. I already pulled the T18 from it, but I don't know if I should save this steering box. Its a manual one, but I think its the right one for the reverse ford steering in the jeeps. Sorry for the terrible pic.

    [​IMG]
     
    garage gnome, Jun 1, 2020
    #1
  2. Jun 1, 2020
    jeepdaddy2000

    jeepdaddy2000 Active Member

    Eagle Point oregon
    Joined:
    Jun 24, 2004
    Messages:
    1,146
    The sector shaft is too long, pushing the body of the box above the frame. The Saginaw box (power or manual) is a simpler, easier, and cheaper swap.
     
    jeepdaddy2000, Jun 1, 2020
    #2
New Posts