1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Winch bumper

Discussion in 'Builds and Fabricators Forum' started by DanStew, Mar 6, 2010.

  1. Mar 6, 2010
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Does anyone have a roller fairlead around to give me a measurement? I am making a winch bumper and I do not have a fairlead yet and I need to cut an opening in a front piece of metal that will mount the fairlead. I jsut need to know what size opening i need to make.

    Thanks!!
     
    DanStew, Mar 6, 2010
    #1
  2. Mar 6, 2010
    Mike C

    Mike C Member

    Austin, TX
    Joined:
    Feb 19, 2007
    Messages:
    743
    Mike C, Mar 6, 2010
    #2
  3. Mar 6, 2010
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    The harbor freight fairlead has some dimensions:

    http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=44584

    [​IMG]
     
    EricM, Mar 6, 2010
    #3
  4. Mar 7, 2010
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    You guys are killing me with the Millimeter stuff ;)

    THANKS!!!! :)
     
    DanStew, Mar 7, 2010
    #4
  5. Mar 7, 2010
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    We don't want to be accused of inaccuracy!




    :)
     
    EricM, Mar 7, 2010
    #5
  6. Mar 7, 2010
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381


    It is going on a yota right?? :D
     
    neptco19, Mar 7, 2010
    #6
  7. Mar 7, 2010
    mdbeck1

    mdbeck1 55 Willys CJ5

    Oklahoma
    Joined:
    Aug 21, 2008
    Messages:
    201
    Look at the HF link. It gives it in SAE units.

    of course they measured it to the closest 1/64th.
     
    mdbeck1, Mar 7, 2010
    #7
New Posts