1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Who wants hazard indicator

Discussion in 'Intermediate CJ-5/6/7/8' started by chsullivan, Jan 18, 2011.

  1. Jan 22, 2011
    OleBlue

    OleBlue Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    I would think that unless there is enough interest and he can make all 3 the original green, we would want the hazard to match the blue 76+ lights and wiper indicators you see at any jeep store....just my 2 cents.
    Posted via Mobile Device
     
  2. Jan 22, 2011
    ErksBurgMN

    ErksBurgMN 200$ Jeep

    Grand Rapids,...
    Joined:
    Jul 9, 2010
    Messages:
    23
    Put me on your list. Thanks.
     
  3. Jan 23, 2011
    Alex V.

    Alex V. Member

    Campbellsville, KY
    Joined:
    Mar 12, 2008
    Messages:
    408
    If they're accurate, I'd buy at least one of the hazards for my '75 CJ5 restoration, and possibly a whole set if they were made available.

    I know it might not be very practical (and please don't distract from the topic if anyone wishes to elaborate on my comment - PM me, or something), but it would be nice if individuals would make these pieces we can't get for our older Jeeps anymore. There's currently a thread on here about the plastic, below-dash heater/climate control assembly - couldn't a company be contracted with to mold those? It would, no doubt, help a lot of people. JM2CW.
     
  4. Jan 26, 2011
    chsullivan

    chsullivan Member

    Houston TX
    Joined:
    Mar 27, 2010
    Messages:
    115
    Ok just wanted to give a update Nick said hes been busy and will try and have the prints by the end of the week and get with me on the process for having them printed so be patient. Soon as i have more info i will update again
     
  5. Jan 26, 2011
    Alex V.

    Alex V. Member

    Campbellsville, KY
    Joined:
    Mar 12, 2008
    Messages:
    408
    Thanks for the update. :D
     
  6. Feb 3, 2011
    chsullivan

    chsullivan Member

    Houston TX
    Joined:
    Mar 27, 2010
    Messages:
    115
    Ok so I just submitted the Jpeg Nick emailed me yesterday and already spoke with the print company and the lady said she would get back with me this afternoon with a price and how long it should take and payment so we are close. Nick also informed me to make them the color you want I will need to buy colored transparencies from office depot, that’s how he made the colors he wanted. So basically what I will do is cut the lens and send the lens with the colors for which everyone would want. He said for blue it would be 3 greens a blue and a purple to make it look like the new ones or for green it would be 3 greens or if you wanted it red 3 reds, so when I get them in I will get everyone to email me to get all the details worked out sound good to everyone.
     
  7. Feb 3, 2011
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
    Sounds good. Thanks for taking on this project.

    If I understand correctly, the print company will print the words on the transparencies. We would receive the printed transparency only and would have to use an existing/new dash light to put it on? Or will this be a completed assembly?
     
  8. Feb 3, 2011
    OleBlue

    OleBlue Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    So, we will be able to get the color we want? I prefer blue to match the other aftermarket ones you can get.
    Posted via Mobile Device
     
  9. Feb 3, 2011
    chsullivan

    chsullivan Member

    Houston TX
    Joined:
    Mar 27, 2010
    Messages:
    115
    Correct I will be sending out just the lens and colored transparencies needed for what color you decide you want and the light will be up to you. The photo company said they should have it ready by next week and I will pick up the colors this weekend and some stamps and figure up the cost for each it shouldn't be anymore than 3-4 dollars for a setup. I will do just like he did and pm everyone when I have everything together for your address and send them out US mail sound good to everyone
    Posted via Mobile Device
     
  10. Feb 3, 2011
    iagmc

    iagmc Member

    SE Iowa
    Joined:
    Jun 30, 2009
    Messages:
    181
    If you could mark me down for 3?
     
  11. Feb 3, 2011
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
    10-4. Add me to the list. 1 each color , blue and green.
     
    Last edited: Feb 6, 2011
  12. Feb 3, 2011
    goodolboy71

    goodolboy71 Member

    SC
    Joined:
    Dec 16, 2003
    Messages:
    51
    same here I will take 3 as well
     
  13. Feb 3, 2011
    Alex V.

    Alex V. Member

    Campbellsville, KY
    Joined:
    Mar 12, 2008
    Messages:
    408
    Sounds great to me! Sorry if this has already been covered - are you only doing hazard light lenses, or whole sets?
     
  14. Feb 3, 2011
    chsullivan

    chsullivan Member

    Houston TX
    Joined:
    Mar 27, 2010
    Messages:
    115
    Yes just the lenses with transparencies per what color you want, so you will need to use your old lamp housing our buy a new one. I am doing this to keep cost down and time because it has taken 2 weeks already just to get this going. The lenses will be cut to size along with the colored transparencies so all that will be needed is to be mounted in place. I will set up payment through paypal once i get everything purchased this weekend and the shipping cost on the prints from the company, but as stated it shouldnt be anymore than 4 bucks per lens and thats shipped.
     
  15. Feb 4, 2011
    LXXIV_CJ

    LXXIV_CJ Member

    Manassas, VA
    Joined:
    Nov 15, 2010
    Messages:
    116
    :lurk: Waiting on PM!!
     
  16. Feb 4, 2011
    roadhog304

    roadhog304 Member

    Leon Kansas
    Joined:
    Dec 25, 2007
    Messages:
    291
    put me down for one also. i would like one of the blue ones that will match the rest of my new dash indicators.
     
  17. Feb 5, 2011
    chevy71super

    chevy71super Member

    California
    Joined:
    Oct 16, 2010
    Messages:
    60
    I would like 2 in green. Thank you, Doug
     
  18. Feb 6, 2011
    BrettM0352

    BrettM0352 Member

    Fort Worth, TX
    Joined:
    Oct 14, 2010
    Messages:
    448
    I would like 1 blue and 1 green. Thanks a lot
     
  19. Feb 9, 2011
    OleBlue

    OleBlue Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Any updates?
     
  20. Feb 11, 2011
    chsullivan

    chsullivan Member

    Houston TX
    Joined:
    Mar 27, 2010
    Messages:
    115
    Ok just got the lenses in yesterday and will start working on getting them cut this weekend, so everyone who wants one please PM me with your address and how many and what color and i will reply with my paypal info once i have them ready to go. They will be $4 dollars each and that includes the lens, colored transparencies and shipping. I will try and get one cut tonight and post a pic of the outcome on these so everyone can see what they are getting.
     
    Last edited: Feb 11, 2011
New Posts