1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where To Find Parts

Discussion in 'Early CJ-5 and CJ-6 Tech' started by sparky, Sep 27, 2004.

  1. Sep 28, 2018
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member Sponsor

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    5,613
    For this sort of stuff I source the artwork on the net & laser print it onto vinyl or water decal sheets which you should be able to find on the net or better business supply stores.
     
  2. Oct 30, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    327
    Where can I find the gaskets for dana 25 warn locking hubs?
     
  3. Oct 31, 2018
    Focker

    Focker I Hate Being Bi-Polar, It's Awesome. Staff Member Sponsor 2019 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    5,944
    tripilio and TIm E like this.
  4. Oct 31, 2018
    TIm E

    TIm E Member Sponsor 2019 Sponsor

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    592
    If they are the M54 hubs (cast in the finger hole recess on the part you turn), Focker is right that the 7300 kit gaskets will fit.
     
    tripilio likes this.
  5. Oct 31, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    327
    I would probably use RTV or make my own gaskets (I have done that before). They are not identified with any special casting on the dial. Any particular RTV recommended? I don't need all the extra parts in the kit, all I need are the paper gaskets that go in between the two aluminum bodies.

    IMG_20180919_073352891_BURST000_COVER_TOP-816x459.jpg
     
  6. Oct 31, 2018
    Focker

    Focker I Hate Being Bi-Polar, It's Awesome. Staff Member Sponsor 2019 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    5,944
    Black should be fine.
     
    tripilio likes this.
  7. Oct 31, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    327
    (y)
     
  8. Apr 24, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    327
    Does anyone knows where to find a glovebox button for a 62 cj5? Thanks!
     
  9. Apr 24, 2019
    jzeber

    jzeber Well-Known Member Sponsor 2019 Sponsor

    Morgan Hill, Ca
    Joined:
    Nov 15, 2003
    Messages:
    2,049
    i put up a WTB here and got one in a couple days.
     
    tripilio likes this.
  10. Apr 25, 2019
    JeepinLee

    JeepinLee New Member

    Michigan
    Joined:
    Mar 4, 2019
    Messages:
    15
    Searched majority of the links in the thread and still can’t find a complete brake overhaul kit for a 69. Most kits say they’re for 66 and older? Anyone know where to find a kit at? Still not sure if I need everything but why not replace it all while it’s apart
     
  11. Apr 25, 2019
    fyrmn

    fyrmn Member Sponsor 2019 Sponsor

    Camp Verde, AZ
    Joined:
    Apr 29, 2006
    Messages:
    97
    Call Walcks. They are very helpful
     
  12. Apr 25, 2019
    timgr

    timgr Jeepin' Nerd Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    19,805
    What do you mean by "complete brake overhaul kit?" That's not a term that I would apply. Typically you can (could?) buy hardware kits (aka spring kits) and cylinder rebuild kits. I don't see a hardware kit on RockAuto but I see most everything else you might need under brakes. Return springs may be missing from the listing but you may not need those. You can test springs by dropping from waist height on a concrete floor. A good spring will click when it hits, like a pebble, and a bad spring will buzz.
     
    Focker likes this.
  13. Apr 25, 2019
    JeepinLee

    JeepinLee New Member

    Michigan
    Joined:
    Mar 4, 2019
    Messages:
    15
    By complete overhaul kits I mean all the brake parts shoes, cylinders, springs, drums, and master cylinder. That’s what several websites include in what they call over haul kits
     
  14. Apr 25, 2019
    timgr

    timgr Jeepin' Nerd Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    19,805
    Not a packaging that I am familiar with, though I have not worked parts counter for over 20 years. Seems to me like a particularly bad deal for the customer, likely containing many parts they don't really need and implying that they need to replace everything in the kit. Brake service is not like an engine overhaul... I kinda think engine overhaul kits have a similar problem, selling you parts you likely don't need and possibly not including what you do need. Better to go ala carte. JMO.

    I expect, for an old and oddball car like this, you will have to buy the parts that you want separately and not in a kit. Your problem will be finding the parts for sale anywhere, much less in convenient kit form.
     
  15. Apr 27, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member Sponsor

    Denver, CO
    Joined:
    Jul 18, 2013
    Messages:
    2,122
    For the rear 10" brakes on my 70...I got all the pieces separately from NAPA. There are a couple springs that were not available but I was able to clean up an re-use the old ones.
     
  16. May 26, 2019
    65seejayfive

    65seejayfive Blazin’ new trails

    York, PA
    Joined:
    Apr 10, 2018
    Messages:
    267
    Tripilio,
    I know this is a little late to your original post but thought I’d share this if anyone else is looking. I bought mine here:

    Front Wheel Drive Flange Gasket Fits 41-71 Jeep & Willys

    [​IMG]
     
    tripilio likes this.

Share This Page

New Posts