1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

When were Power-loc's introduced?

Discussion in 'Early Jeep Restoration and Research' started by windyhill, Mar 10, 2011.

  1. Mar 10, 2011
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    When where the Power-locs first offered as an option? Where they an option for the CJ2A's 3B's and 3A's or did it start with the early CJ5's? I have the rare Dana25 power-loc and wonder if it would be correct for my late '48 cj2A?
     
    windyhill, Mar 10, 2011
    #1
  2. Mar 10, 2011
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,189
    Re: When where Power-loc's introduced?

    No, totally incorrect for your flatty. Only correct for a '56 CJ-5 painted red from the Northeast. Send it to me and I'll make sure it's well cared for bunny with a pancake.
     
    SIDSCJ, Mar 10, 2011
    #2
  3. Mar 10, 2011
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    Re: When where Power-loc's introduced?

    Ahh ok. :)
     
    windyhill, Mar 10, 2011
    #3
  4. Mar 10, 2011
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,189
    Re: When where Power-loc's introduced?

    As far as I've found so far, literature starts with the 3B. If you stuff it in there, who's to know??
     
    SIDSCJ, Mar 10, 2011
    #4
  5. Mar 10, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Re: When where Power-loc's introduced?

    I know the Marine Corps ordered them in many M38a1's so that would be before CJ's. Not sure if they were optional in Flatty's or not. Good question. Might contact Jpflat2a and see if he has a parts listing for them.
     
    nickmil, Mar 10, 2011
    #5
  6. Mar 10, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,520
    Re: When where Power-loc's introduced?

    Nothing ever for flatties that I know of.
    Unsure myself of when they started in biscuit fenders.
    Prolly started with the military models and morphed from there.
    I don't recall that they were ever available from the factory in the front.
    Rear yes; front ???
     
    jpflat2a, Mar 10, 2011
    #6
  7. Mar 10, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,117
    Re: When where Power-loc's introduced?

    They were for both the model 25 (p/n 924139) & 27(926814). This started sometime after '59.

    H.

    Edit- This is for the front axle, for the rear axle they were avaialble in '55 but only for vehicles after s/n 11871(5)/33174(3B)/11870(6). Apparently there was a change to the axle shaft spline shape- the earlier shafts wouldn't fit into the side gears.
     
    Last edited: Mar 10, 2011
    Howard Eisenhauer, Mar 10, 2011
    #7
  8. Mar 10, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,520
    Re: When where Power-loc's introduced?

    that's probably the 10 spline to 19 spline change.
    I knew they were available over the counter, but were they ever factory installed?
    I recall installing powerlocks into D30s as late as 1983-1984 because of no factory installed option.
     
    jpflat2a, Mar 10, 2011
    #8
  9. Mar 10, 2011
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    Re: When where Power-loc's introduced?

    So the ones for the Dana 25 where only special order CJ5 or from a m38-A1 that's why there are so few of them.

    I got a set of axles form a early CJ5 it was an early one but unsure of year 59-early 60's. The axles have 5:38 gears and power-locs front and rear. front is a Dana 25 rear is a Dana 44 not sure if it's 10 spline or 19 but considering the front is a 25 I'm guessing its and early set with 10 splines. The power-locs for the Dana 27 are a little easier to find but still not many.
     
    windyhill, Mar 10, 2011
    #9
  10. Mar 10, 2011
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,477
    oldtime, Mar 10, 2011
    #10
  11. Mar 10, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,117
    Re: When where Power-loc's introduced?

    Nope, 19 spline came much later. These were both 10 spline axles, but one used "involute" shaped splines.

    H.

    Edit(This is getting to be a habit)- Ooops- BooBoo :(- I'm wrong- :oops:This switch happened at s/n 43842, late- 56-ish as Oltime's reference says. I'll take his word for it that this is indeed the switch to the 19 spline shafts.

    But why couldn't the #%$&* manuals just call'em that?:mad:

    H.
     
    Last edited: Mar 10, 2011
    Howard Eisenhauer, Mar 10, 2011
    #11
  12. Mar 10, 2011
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    windyhill, Mar 10, 2011
    #12
New Posts