Vintage Monarch A101 hydraulic plow pump set up for F-Head 4cyl

I was kind of interested in getting the parts but dropped the ball. My monarch only has the up and down functions. Mounted on a V6.

 

Thanks, but no. That's not an A 101. From what I gather here. people are talking about several different pumps which is why I am looking for pics. My pump is the one in the pic a few posts above, but I cant really see the brackets. The HUT is for CJ's with the f head and is the one most people think of when someone says HI/LO. The HUT-J is for J trucks and I am not exactly sure what the HUT JA . They are all mounted to the generator. The A101 is specifically for the Dauntless and since there is an alternator is mounted on the driver side to the engine block. I am having problems with mine and I believe it is because the PO mounted it on the passenger side.

 

I have both, but my 4 way control valve is worn out and the up and down is slow if works at all. Some of this has to do with the retrofit mounting the PO did.

 

If you have a decent alternator, you can do electrical linear actuators or a winch to raise the plow.

Also, can’t the later PS pumps mount right up to the 225? Large fluid res and a valve to raise the plow?

 

After doing this, I wouldn’t consider any other way. It’s simple and extremely effective.
Snow Plow Redo

 

Is it possible to take pictures of how your pump and valve is installed? That's really all I am looking for here.