1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

V6 clutch replacement questions

Discussion in 'Early CJ5 and CJ6 Tech' started by Hippo393, May 28, 2004.

  1. May 28, 2004
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    I'm replacing the diaphragm clutch from a T-90 onto a 225. The one that is being replaced is smaller in diameter than most I've seen. The disc is only 9.25" in diameter with matching p.plate. Anyone forsee any probs with replacing it with the standard 10.5" disc & p.plate?
     
  2. May 29, 2004
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Here's a pic of what I mean:

    [​IMG]

    You can see the wear pattern differences on each of the 2 flywheels. Both came off a V6. What I want to do is put the larger size clutch disc & p.plate (on right) in place of the smaller size on left. Just wondering if anyone can forsee any probs doing this. I don't anticipate any probs, but I'd better ask before installing.
    Has anyone ever seen the smaller size disc & p.plate before?
     
New Posts