1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tub Hoist

Discussion in 'Builds and Fabricators Forum' started by walkerbs, Jan 2, 2005.

  1. Jan 2, 2005
    walkerbs

    walkerbs walkerbs

    Roseburg, Or
    Joined:
    Nov 20, 2004
    Messages:
    29
    I just pulled the tub off my 48 Willys using my engine hoist and a electric hoist from Harbor Frieght. I attached the hoist to my engine hoist, lifted the hoist up and used the control to lift the tub up as I walked around to set it free. It was perfect for one person to get a tub off.
    Bruce
    Have a great jeepin year.
     
    walkerbs, Jan 2, 2005
    #1
  2. Jan 2, 2005
    speedbuggy

    speedbuggy Looking for a Jeep now

    Living the Good...
    Joined:
    Jul 1, 2004
    Messages:
    1,270
    Next time you have that set up, would you take a pic so we can see? I'd like to see that.
     
    speedbuggy, Jan 2, 2005
    #2
  3. Jan 2, 2005
    walkerbs

    walkerbs walkerbs

    Roseburg, Or
    Joined:
    Nov 20, 2004
    Messages:
    29
    Hi Dennis,
    I took some photos and they didn't come out very clear. It's still set up so I will take some more. I still have to pull the motor and fit my other. It was the slickest way to pull a tub for one person.
    Bruce
     
    walkerbs, Jan 2, 2005
    #3
  4. Jan 2, 2005
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    sounds like a cheap trick.
     
    66cj5, Jan 2, 2005
    #4
  5. Jan 3, 2005
    JohnyJeep

    JohnyJeep BLOWING A XING NEAR U@2AM

    Beautiful Cody WY
    Joined:
    Sep 22, 2002
    Messages:
    513
    I did the same thing with my tub, minus the electric hoist. I just chained to some existing holes in my floor under where the seats were and triangulated to another hole towards the rear (seat belt hole) and hooked to the engine hoist. Worked pretty well. Had to stabilize with my hands but it worked.
     
    JohnyJeep, Jan 3, 2005
    #5
  6. Jan 3, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    My brother did the same thing with his TR3 body:

    [​IMG]

    Not a Jeep, but the same idea. The TR needs braces welded across the door openings to keep it from folding in half. Depending on the condition of your floors, something similar might be needed on a CJ.
     
    timgr, Jan 3, 2005
    #6
New Posts