1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transfer Case Vent

Discussion in 'Early CJ5 and CJ6 Tech' started by modadds, Nov 17, 2016.

  1. Nov 17, 2016
    modadds

    modadds New Member

    Sweetwater, Texas
    Joined:
    Feb 25, 2014
    Messages:
    44
    How is the vent on top of the transfer case removed? Mine is covered in mud , grease, and every other thing in the world. Dont' want to ruin it , but it needs cleaning.
     
    modadds, Nov 17, 2016
    #1
  2. Nov 17, 2016
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    Just screws into the case- it's a 1/4" NPT thread IIRC. Clean enough mud off & you should see the flats for the wrench to fit on.

    H.
     
    Howard Eisenhauer, Nov 17, 2016
    #2
  3. Nov 17, 2016
    modadds

    modadds New Member

    Sweetwater, Texas
    Joined:
    Feb 25, 2014
    Messages:
    44
    Thanks. Just couldn't tell if it was threaded or press fit.
     
    modadds, Nov 17, 2016
    #3
New Posts