1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Top And Roll Bar Question

Discussion in 'Early Jeep Restoration and Research' started by Aidan Turner, Jun 22, 2020.

Tags:
  1. Jun 22, 2020
    Aidan Turner

    Aidan Turner New Member

    Morristown, NJ
    Joined:
    Jun 19, 2020
    Messages:
    41
    I have a 63 CJ5 and was curious if later CJ5 or CJ7 tops and roll bars would work on mine.

    Mine currently has an original safari type of set up but doesn’t have any canvas. A replacement canvas is proving hard to find at the moment so I’m looking for alternatives.
     
    Aidan Turner, Jun 22, 2020
    #1
  2. Jun 22, 2020
    73 cj5

    73 cj5 Not ready for the junkyard yet

    Clinton, Mississippi
    Joined:
    Jan 10, 2014
    Messages:
    2,143
    73 cj5, Jun 22, 2020
    #2
    Aidan Turner likes this.
  3. Jun 22, 2020
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,804
    I personally like the military style "summer" top. No side panels. The military bows can be fitted to a CJ5.

    M38A1 Top 1.JPG
     
    PeteL, Jun 22, 2020
    #3
  4. Jun 22, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,188
    The roll bars that mount on top of the rear fender wells will fit your '63. Tops for a CJ5 up thru 1975 should fit too. After that, the windshield frame lays back more, and is narrower.
    Your Tux originally came with a black or white "pinpoint" grain vinyl top that used footman loops/straps rather than snaps. You will have to have one custom made as they haven't been made like that on over 50 years. Best Top is likely your best option for a top today.
    -Donny
     
    Last edited: Jun 25, 2020
    Keys5a, Jun 22, 2020
    #4
  5. Jun 22, 2020
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Should be able to get a marine canvas type place to handle making a new canvas piece.
     
    Boyink, Jun 22, 2020
    #5
    Aidan Turner likes this.
New Posts