1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Today's Mystery Question- Engine Mount Bracket

Discussion in 'Early CJ5 and CJ6 Tech' started by Howard Eisenhauer, Oct 8, 2004.

  1. Oct 8, 2004
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    O.K.- What's this dooey on the bottom of my driver's side engine mount bracket for? Never noticed it before I got the frame cleaned up but I'm pretty sure it musta been there all along.

    Thanks,

    Howard.
     
  2. Oct 8, 2004
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,376
    The flexible brake hose goes through there to anchor it in place. The big part will stop it from going through, then a little clip goes on and holds it in place. At least I think it's for that. Now I need to look at mine and see where it's at on that side.
     
  3. Oct 8, 2004
    gte636p

    gte636p Member

    smyrna, Ga
    Joined:
    Sep 23, 2002
    Messages:
    492
    flexible brake hose line? it needs to go from hard frame line to a hard axle line somewhere... why not there?

    glenn beat me to it...
     
  4. Oct 8, 2004
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
  5. Oct 9, 2004
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Is that what the hurricane engine mount looks like??
     
  6. Oct 9, 2004
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    Well, one of them does :).

    Let me know if you want a picture of the other side, it's a little different.

    H.
     
New Posts