1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Tie rod interference

Discussion in 'Flat Fender Tech' started by Phil P, Feb 15, 2011.

Page 3 of 3
  1. Mar 22, 2011
    ralf

    ralf New Member

    Fayetteville WV
    Joined:
    Mar 14, 2010
    Messages:
    33
    Yea, I am not old enough for old school. There is no welding skill involved, you just drop in the tapered insert and tack it around the edge. I stand corrected on "high steer" the tie rod flip is higher steering.
     
    ralf, Mar 22, 2011
    #41
  2. Mar 24, 2011
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    I used Snap-On #R121. Cost me $50 off the truck. You'll be surprised how many times it gets used once your buddies find out you have one.
     
    jayhawkclint, Mar 24, 2011
    #42
  3. Mar 24, 2011
    Redcj3a

    Redcj3a New Member

    Middletown, Ohio
    Joined:
    Dec 12, 2010
    Messages:
    13
    I used a two hole, right side knuckle with a tie rod flip on my 3A. I have clearance on both sides at full turn. I used the taper and insert process. Hope these two images are loaded properly.

    Next step for me is a manual saginaw box installation.

    John

    [​IMG]
    [​IMG]
     
    Last edited by a moderator: Mar 24, 2011
    Redcj3a, Mar 24, 2011
    #43
Page 3 of 3
New Posts