1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Official "What The Heck Is This?" Thread

Discussion in 'Early CJ5 and CJ6 Tech' started by Focker, Feb 19, 2016.

Page 64 of 106
  1. May 11, 2020
    durangotang

    durangotang Member 2022 Sponsor

    Not Western CO
    Joined:
    Mar 17, 2010
    Messages:
    501
    Motorcycle fork. Could narrow it down further if you find the stamping that says "made in xxxxx" and a part number. Stampings would be on one of the gray fork legs.
     
    durangotang, May 11, 2020
    #1261
  2. May 11, 2020
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Motorcycle stuff. I see a triple clamp and a fork for sure.
     
    Focker, May 11, 2020
    #1262
  3. May 11, 2020
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,704
    Front forks of some kinda Bike.
     
    Lockman, May 11, 2020
    #1263
  4. May 18, 2020
    Monty

    Monty New Member

    Pasadena, CA
    Joined:
    Sep 9, 2019
    Messages:
    26
    PO installed a replacement steering column and front disk brakes, but I have no way to figure out the manufacturer for replacement parts- internal blinker mech, and brake pads.

    Anyone have any idea what these could have been from? Second image is the column’s electrical connection.

    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
     
    Monty, May 18, 2020
    #1264
    Cowboyjeeper likes this.
  5. May 19, 2020
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    473
    Cool disk brake set up
     
    Cowboyjeeper, May 19, 2020
    #1265
  6. May 20, 2020
    Monty

    Monty New Member

    Pasadena, CA
    Joined:
    Sep 9, 2019
    Messages:
    26
    Update to my own post - randomly typed in some keywords and learned the steering column is out of a 63-66 Buick Riviera.

    Now on to those brakes.
     
    Monty, May 20, 2020
    #1266
  7. May 20, 2020
    wheelsontheroof

    wheelsontheroof New Member

    dupont pa
    Joined:
    Apr 1, 2020
    Messages:
    37
    the calipers look like factory from late model cj . my 77 had similar ones
     
    wheelsontheroof, May 20, 2020
    #1267
  8. May 20, 2020
    Monty

    Monty New Member

    Pasadena, CA
    Joined:
    Sep 9, 2019
    Messages:
    26
    AWESOME! Thank you
     
    Monty, May 20, 2020
    #1268
  9. May 20, 2020
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,611
    The brakes are same as mine. Two bolt caliper mount from a 79 CJ. I had the hardest time figuring out the hardware kit.
     
    Buildflycrash, May 20, 2020
    #1269
  10. May 20, 2020
    Randy Benedict

    Randy Benedict Member

    Center, MO
    Joined:
    Jan 13, 2020
    Messages:
    102
    Here's a head scratcher for me. What is it? Is was in a box of parts that came with a dauntless I bought. I've owned a few dauntless and have never seen anything like this. It is about 2 inch diameter and about 2 inches tall. 20200520_171410.jpg 20200520_171146.jpg
     
    Randy Benedict, May 20, 2020
    #1270
  11. May 20, 2020
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Spokane Valley, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,680
    ITLKSEZ, May 20, 2020
    #1271
  12. May 20, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, May 20, 2020
    #1272
  13. May 20, 2020
    Randy Benedict

    Randy Benedict Member

    Center, MO
    Joined:
    Jan 13, 2020
    Messages:
    102
    Randy Benedict, May 20, 2020
    #1273
  14. May 20, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    DR is Delco-Remy. Here's crossing the number on RockAuto. RockAuto

    Looks like a bunch of GM cars. Would not be our Jeeps, since you need computerized spark control to use the knock info.
     
    timgr, May 20, 2020
    #1274
  15. May 20, 2020
    Randy Benedict

    Randy Benedict Member

    Center, MO
    Joined:
    Jan 13, 2020
    Messages:
    102
    Thanks Tim
     
    Randy Benedict, May 20, 2020
    #1275
  16. May 20, 2020
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,704
    It's for a Buick 231 Turbo ....... Don't know why it's in your box of 225 parts?
     
    Lockman, May 20, 2020
    #1276
  17. May 21, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,190
    That knock sensor was used possibly from the late-'80s all through the '90s, so it fits many GM applications. My '95 LT1 Capice engine uses that part.
    -Donny
     
    Keys5a, May 21, 2020
    #1277
  18. May 21, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,190
    Good search! I have that same tilt column from a '64 Rivvy. I'm a day late seeing this for the indentification.
    -Donny
     
    Keys5a, May 21, 2020
    #1278
    Monty likes this.
  19. May 21, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,190
    The chrome lever on the dash is the parking brake pull.
    -Donny
     
    Keys5a, May 21, 2020
    #1279
  20. Jun 29, 2020
    Erik

    Erik New Member

    California
    Joined:
    Aug 18, 2019
    Messages:
    15
    7AB7DD4B-3B6B-49D2-985E-73490858E185.jpeg
    I can’t confirm what fluid goes in here. I think the book says GL3 SAE140, but I see other people stuff it with grease. Any ideas?
     
    Erik, Jun 29, 2020
    #1280
Page 64 of 106
New Posts