1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Gold Project

Discussion in 'Builds and Fabricators Forum' started by neptco19, Jan 24, 2007.

  1. Mar 13, 2007
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    keep up the good work.
     
  2. Mar 13, 2007
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422

    Where's the green with envy icon???? I like the looks of the XJ clutch master. Can you tell me if the master/hose/slave is all joined as one assembly or can the three be separated?

    My clutch master is shot and the XJ design looks like it would make for a cleaner install anyway. Whether it will work with my slave cylinder is another story though...
     
  3. Mar 13, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381

    Yup Mike they all 3 seperate from eachother. From the looks of it I believe its the same clutch master thats on YJs also.
     
  4. Mar 13, 2007
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422

    Nice. I think I'll have NAPA drop one off for inspection tomorrow.
     
  5. Mar 14, 2007
    Hawkes

    Hawkes Member

    Nova scotia
    Joined:
    Jun 18, 2003
    Messages:
    490
    The TJ's have a plastic hose, joined to the master and slave with a roll pin. I thought YJ's and XJ's were the same, but maybe you're using an earlier model. Mine is out of an S10, it doesn't go straight through the firewall, it is on a downward slant.

    Paul
     
  6. Mar 14, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381

    This ones out of a mid 90s XJ.
     
  7. Mar 14, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    You done yet Jason??? Times a wasting :)
     
  8. Mar 14, 2007
    Hawkes

    Hawkes Member

    Nova scotia
    Joined:
    Jun 18, 2003
    Messages:
    490
    My 2000 TJ needed a slave in a hurry, so I grabbed one from a '95 XJ, and the whole system is the same except for where the plastic tube enters the XJ master it is in a different location from the TJ master. Interesting, must have been a mid 90's change. Nice to know, I must check out the earlier XJ slaves.

    Paul
     
  9. Mar 14, 2007
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422
    Since we're comparing, I found different part numbers for XJs and YJs. I looked up masters for model year 99 and found that the TJ and XJ masters were different from both one another and from the earlier units. I'm lucky enough to be able to have NAPA bring me one of each so I can check them out to see which will work best, then send the other three back.

    I'm hoping that I can find one that has a hydraulic fitting similar to the one on the Chevy hydraulic clutch linkage I'm using. I guess I'll find out when they arrive...
     
  10. Mar 17, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Got my shocks in on Fri. and started mounting them today. The shocks are Bilstein 5125s 14" travel. Bent the front hoops up and added a bar to the rear part of the cage for the shock to mount up to..

    [​IMG]

    [​IMG]
     
  11. Mar 17, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    HeyJason, show some pics of the rear shocks. It looks like you have a hoop. Did you notch into the body or are the axles wide enough to keep them away from the tub.
     
  12. Mar 17, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381

    I cut a hole in the top/side of the fenderwell for the shock to pass through and added that diagonal bar in the cage with some tabs on it for the shock to bolt to. I think I got a pic of it where it passes through....let me check....
     
  13. Mar 17, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Heres a pic of where it mounts Dan..

    [​IMG]
     
  14. Mar 17, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    Thats right, i remember you saying you were doingthat. . i wouldnt mind doingthat also, could also make a grommet to cover the hole to keep the mud out of the cab. are you going to run a soft top anytime? or is it going to be a topless jeep at all times ;)
     
  15. Mar 17, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Topless :) Im planning on making some sort of skins for the top of the cage to go over the driver/passenger for when its nasty weather and to keep the sun off.
     
  16. Mar 17, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    Sweet. so how far fab wise are you? what is the list you still have to do?
     
  17. Mar 18, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Gotta redo the steering, didnt like how it turned out the first time :( But other than that all the big stuff is done. I'll start taking it apart today or tommorow so I can finish up the interior sheetmetal work, weld everything up, clean/paint everything and then it will be time to put it back together. And hopefully hear it run/drive in a week or two.
     
  18. Mar 18, 2007
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    Sweet!!!
     
  19. Mar 19, 2007
    runnamuck

    runnamuck look out!

    hickory, nc
    Joined:
    Nov 7, 2005
    Messages:
    223
    blah, get it done man. riverrock is coming up and we both know my heaps ain't gonna make it (stupid house, arrgh). so how much did you get done sun.? :p
     
  20. Mar 19, 2007
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Well not much.... Got all my stuff ordered to redo the steering....stupid expen$ive steering ujoints. Once thats in and done I'll pull it all apart. Going to the SEMA show this weekend and meet up with Ken to hopefully get my beadlocks, so that will be another project to add to the list :rofl:
     
New Posts