1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

TH 350 Performance question.

Discussion in 'Early CJ5 and CJ6 Tech' started by Tom_Hartz, Mar 30, 2015.

  1. Mar 30, 2015
    Tom_Hartz

    Tom_Hartz Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    North Carolina
    Joined:
    Apr 9, 2014
    Messages:
    478
    I am still thinking about doing a TH 350 conversion. My question is for those that have done a conversion and felt the performance of the Jeep before and after.
    Did you feel much of a difference going from a stick to the automatic? I have a slightly built odd fire V6, Dana 18, Warn OD and running 33" tires with 4.88 gears.
     
  2. Mar 31, 2015
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,418
    Not really . only change is D or R . and it will up shift faster than in a car . but what do I know went back to stick . the one thing that annoyed me the most was . you had to turn engine off . just to shift transfer case from hi to low / low to high or it would grind trying to going in
     
    Last edited: Mar 31, 2015
  3. Mar 31, 2015
    Tom_Hartz

    Tom_Hartz Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    North Carolina
    Joined:
    Apr 9, 2014
    Messages:
    478
    Good point on shifting the transfer case. I did not think of that.
     
  4. Mar 31, 2015
    Pack Rat

    Pack Rat Old Timer

    I live in a...
    Joined:
    Apr 1, 2006
    Messages:
    1,512
    Not a 350 but my Commandos run 400 turbos, never once had to shut the engine off to shift the transfer case.
     
  5. Apr 1, 2015
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    Interesting, Ron... I have only slight initial grind from gear mesh going into 4-low whether in gear or neutral (manual trans). Never thought it would matter if using an auto. In my son's YJ with an auto I've not had to shut it off or put it in neutral to get into 4-hi/ low.

    As much as I hate to admit... I like driving the auto trans YJ.:rofl: I've thought about this conversion for my CJ ALOT over the past year (actually have the BOP T-350 trans), just wish there was more documented swap/ user info on this or other sites aside from the ones selling the adapters.
     
  6. Apr 1, 2015
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,418
    the only picture of auto in jeep . when I was redoing tub
    [​IMG]
     
  7. Apr 1, 2015
    Greenwithenvy

    Greenwithenvy Christian Jeeper!

    Chelan, Washington
    Joined:
    Nov 17, 2014
    Messages:
    47
    That's not the case with mine! The only time I have to shut off the engine to shift, is when I'm stopped, then to go from high to low it will grind. To help answer your question, I think I read some place that you will loose about 35 hp. to the rear wheels from a TH350.
     
  8. Apr 1, 2015
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    My Dad put a TH350 behind his Dauntless 15 years ago. It works really well. Never had to shut the engine off to shift the transfer case. As far as performance, it's hard to say. My Dauntless was built virtually the same as his but I had a T18. We never actually raced, but I'd guess in shear acceleration they were comparable.
     
    PigeonsBlood likes this.
  9. Apr 1, 2015
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Just make sure you use an appropriate torque converter
     
  10. Apr 2, 2015
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    That certainly proves reliability!! Any chance he may have documented the conversion with pics/ notes that could be used as a future (real world) reference for folks?
     
New Posts