1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T-98 Adapter Plate

Discussion in 'Early CJ5 and CJ6 Tech' started by Magicbeard, Oct 20, 2020.

  1. Oct 24, 2020
    Henri Watson

    Henri Watson Member

    Mississippi
    Joined:
    Oct 27, 2018
    Messages:
    189
    Hope you have some luck finding it on here. I had to get a custom 1" aluminum plate milled to install mine. Wasn't too major of a deal but it definitely added some time to the project.
     
  2. Oct 29, 2020
    Magicbeard

    Magicbeard New Member

    Spain
    Joined:
    Oct 4, 2020
    Messages:
    10
    The UGO T-13 transmission arrived today from Spain. This is the same transmission originally fitted to my Viasa Jeep. Made under license in Spain using Borg Warner parts.

    The bolt pattern between transmission and bell housing matches my M38 / 134F belhousing with 160mm x 105mm bolt spacing. Output shaft is 15/16" - 10 Spline. No need for that illusive adapter plate anymore so my T98 transmission can go for sale.

    Note the bellhousing currently attached is for a later jeep not the 134F which I have shown separately.

    Now I can start of the Kubota engine transplant.
     

    Attached Files:

    Fireball likes this.
New Posts