1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T-90 shift tower rebuild

Discussion in 'Early Jeep Restoration and Research' started by joelsprayberry, Aug 10, 2015.

  1. Aug 10, 2015
    joelsprayberry

    joelsprayberry New Member

    lafayette la
    Joined:
    May 13, 2015
    Messages:
    30
    the pins that hold the forks onto the shift rail were rivets and i had to drill them out. what is a good replacement?
     
  2. Aug 10, 2015
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,491
    The t18 I've been working on has roll pins holding all the shift forks and gates onto the shafts.
     
  3. Aug 11, 2015
    joelsprayberry

    joelsprayberry New Member

    lafayette la
    Joined:
    May 13, 2015
    Messages:
    30
    i found some steel 1 inch rivets in my shop today that fit perfectly. guess i'll be using them.
     
New Posts