1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

swing pedals

Discussion in 'Flat Fender Tech' started by 1pistol, Aug 7, 2011.

Page 2 of 2
  1. Nov 8, 2011
    curbcrawler

    curbcrawler Hacker

    Ohio
    Joined:
    Sep 12, 2010
    Messages:
    59
    I used pedals and m/c out of a 93 cherokee. Clutch M/c and slave for a 95 wrangler I think. Easy fit, works nicely.
     
    curbcrawler, Nov 8, 2011
    #21
  2. Oct 21, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    Will this work on a '65 CJ5 ?
     
    Rollbar, Oct 21, 2013
    #22
  3. Oct 24, 2013
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,498
    Yep, even better than in a flatty as there is a lot more firewall space to work with.
     
    duffer, Oct 24, 2013
    #23
  4. Oct 24, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    One thing I'm not understanding is the HYD clutch setup.

    If memory serves on the '65, isn't there a cable going into the bellhousing? So then would the slave CYL be setup to pull or ?

    Pics/brackets ?

    Thanks,
    Jim
     
    Rollbar, Oct 24, 2013
    #24
  5. Oct 24, 2013
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,469
    Hydro clutch does require the use of either a push or pull slave hooked to the arm. I have used both types - push from Novak, pull from speedway and wilwood. A search will pull up several different setups for you to look at.
     
    Warloch, Oct 24, 2013
    #25
  6. Oct 24, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    Thanks
     
    Rollbar, Oct 24, 2013
    #26
  7. Oct 24, 2013
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,155
    Man, I went the hard way... I went junkyarding with no information (granted this was 10 years ago) and pulled the pedal, clutch master and slave from a 1961 ford dumptruck, the brake master is still the original CJ, just moved to the firewall. This all works, but it required a lot of fabbing up to get it all to fit and does not look nearly as "OEM" as that cherokee setup.. I may have to revisit that mod and update it some~!
     
    Jeepenstein, Oct 24, 2013
    #27
  8. Oct 25, 2013
    Rollbar

    Rollbar Minister

    Florida
    Joined:
    Dec 27, 2005
    Messages:
    404
    Question, since this Jeep has 10" brake drums will I have to install a Drum/Drum proportioning valve or ?

    Thanks,
    Jim


    Sent from my iPhone 4S
     
    Rollbar, Oct 25, 2013
    #28
Page 2 of 2
New Posts