1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

steering box brace

Discussion in 'Intermediate CJ-5/6/7/8' started by mrdavis, Apr 13, 2009.

  1. Apr 13, 2009
    mrdavis

    mrdavis New Member

    Joined:
    Feb 22, 2009
    Messages:
    10
    ok now I need to know has any one made there own steering box brace drivers side .I messed up my cast one and need to build a new one .Im looking for sum pics if any one has done there own .help!!
     
  2. Apr 14, 2009
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
  3. Apr 14, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I think he's referring to the steering box bracket. Junk yard item - there's no aftermarket source for these AFAIK. It's exclusively an intermediate (72-75) part. They are different, but you can use the bracket from either a manual or power steering equipped intermediate CJ.

    If you want to fab one, I think you're on your own. I'd use the original bracket as a pattern and design one out of plate steel that replaces it. If you want to take some pictures and make some measurements and post them, I'm sure you'll get some advice about how to design and fab the bracket. My first thought about a design for this would be to build a box that slides into the frame like the original, then weld a heavy plate to the box in the original position of the gear mounting.
     
  4. Apr 14, 2009
    Bob Greenslade

    Bob Greenslade Member

    Roseville CA
    Joined:
    Sep 15, 2008
    Messages:
    232
    I did this after breaking the stock unit. It's 3/16 plate not pretty but works well so far. My frames ben modified but the same basic design will work fine on the stock frame.
     
  5. Apr 14, 2009
    mrdavis

    mrdavis New Member

    Joined:
    Feb 22, 2009
    Messages:
    10
    I was taking about the drivers side .I couldnt find one ethier.so off to fabbing I go .thanks anyhow .Ill put pics up when I make it
     
  6. Apr 17, 2009
    89diesel

    89diesel Broken!!!...Again

    Regina, SK, Canada
    Joined:
    Jan 8, 2009
    Messages:
    38
    I've had quite a few requests for my version of a "steering box brace". I am the original inventor off the DSS, which adds a crossmember and a sectorshaft support bearing on Dodge pickups.
    I am currently prototyping a similar product that ties that in along with a clamp on the steering box itself also. The original can be seen at http://www.solidsteel.biz/
    Right now I'm working on one for a CJ5 and have one being tested on a XJ.
    Darin
     
New Posts