1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spring Over What's Springs?

Discussion in 'Builds and Fabricators Forum' started by Lanny, Jul 15, 2017.

  1. Jul 15, 2017
    Lanny

    Lanny New Member

    Placerville
    Joined:
    Jul 15, 2017
    Messages:
    10
    I have a m38 running running 2.5 rancho lift spring over with only 3 leafs they are worn out s shaped. I like how low it sits it 24.5 from rocker to ground. I Would like to stay 1 3/4 wide springs. What springs are you guys running?
     
    Lanny, Jul 15, 2017
    #1
  2. Jul 15, 2017
    tymbom

    tymbom Member

    Siskiyou Co.
    Joined:
    Jun 13, 2012
    Messages:
    815
    A spring over will add 4-5 maybe 6in of lift. Plus all the associated head aches with steering and stuff... You end up with a tall, narrow rig. I would just replace the existing springs with something new. Fresh bushings and shackles. Maybe go up an inch or so more and remove a leaf to keep it soft and low...
     
    tymbom, Jul 15, 2017
    #2
  3. Jul 15, 2017
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,880
    Sounds like you may have Wrangler YJ springs. Might be best to just replace what you have.
     
    Daryl, Jul 15, 2017
    #3
  4. Jul 15, 2017
    Lanny

    Lanny New Member

    Placerville
    Joined:
    Jul 15, 2017
    Messages:
    10
    I'm thinking 1 inch superlift spring are going to be my best bet to keep it low.
     
    Lanny, Jul 15, 2017
    #4
  5. Jul 18, 2017
    y2grey

    y2grey Member

    Fayetteville NY
    Joined:
    Sep 18, 2011
    Messages:
    106
    1.75 and only 3 leaves SOA is bent springs waiting to happen. It will also have to do with the length of the perch...too short and you have wrap and bending. I ran 1" ranchos with the short leaf pulled (4 in total) and never had bending. I pulled them over the weekend to go with thinner slightly longer leaves.
     
    y2grey, Jul 18, 2017
    #5
  6. Jul 18, 2017
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    On my old CJ5 I first used stock wrangler leafs for spring over, they did great but did bend a bit over time. I then went to the Rubicon express SOA springs. The eyes are "under" the leafs instead of the normal way for springs so it is not as high but gives some arch to the springs for flex. They were a bit tall but they were new and I did not keep the rig long enough to have it broken in.
     
    DanStew, Jul 18, 2017
    #6
New Posts