1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spindle To Knuckle

Discussion in 'Early CJ5 and CJ6 Tech' started by Jonbbrew, Sep 4, 2020.

  1. Sep 4, 2020
    Jonbbrew

    Jonbbrew Member

    Paso Robles, CA
    Joined:
    Mar 14, 2015
    Messages:
    739
    Hello all,

    Can someone please confirm that there is not a seal nor need for gasket maker between the Knuckle and the Spindle...

    As always, Thanks!
     
    Jonbbrew, Sep 4, 2020
    #1
  2. Sep 4, 2020
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,421
    I wouldn't use a paper gasket there
    a thin layer of permatex is what I use
     
    Twin2, Sep 4, 2020
    #2
    mike starck likes this.
  3. Sep 4, 2020
    Jonbbrew

    Jonbbrew Member

    Paso Robles, CA
    Joined:
    Mar 14, 2015
    Messages:
    739
    Which type?
     
    Jonbbrew, Sep 4, 2020
    #3
  4. Sep 4, 2020
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,823
    #2 Permatex, non-hardening, is my go-to for almost everything.
     
    PeteL, Sep 4, 2020
    #4
    Rick Whitson, Twin2, Jonbbrew and 1 other person like this.
New Posts