1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Source for T-90 gears?

Discussion in 'Flat Fender Tech' started by w3srl, Nov 8, 2005.

  1. Nov 8, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    I'm starting to collect the parts to rebuild my T-90 over the winter and I know I need a replacement second gear. Knowing how bad the quality control can be on some of the offshore Jeep replacement parts, does anyone have a good source for tranny parts?

    I was leaning toward buying the T-90 and D-18 rebuild kits from Herm, but I didn't see any other parts listed. If Herm stocks other stuff, then I'm all set.
     
    w3srl, Nov 8, 2005
    #1
  2. Nov 8, 2005
    Rondog

    Rondog just hangin' out

    Parker, CO
    Joined:
    Aug 25, 2005
    Messages:
    2,918
    Call him and ask (don't email). He's probably got them, or at least would know who does.
     
    Rondog, Nov 8, 2005
    #2
  3. Nov 8, 2005
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    He does....I bought a gear or two along with my rebuild kits this spring
     
    MOP, Nov 8, 2005
    #3
  4. Nov 8, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Cool. Thanks guys! :beer:
     
    w3srl, Nov 8, 2005
    #4
  5. Nov 8, 2005
    willysworker

    willysworker Member

    Joined:
    Oct 12, 2003
    Messages:
    172
    good time to switch to a 3.34 1st. gear. Only available in short shaft for 4 cycle. You'll like it, I ran one until my 225 v6 motor swap. I may still have it kicking around.
     
    willysworker, Nov 8, 2005
    #5
  6. Nov 8, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Good idea! I'm not sure exactly what my tranny came out of, but it didn't have an e-brake assembly or a provision for one. The PO said it was from a wagon though. Did the wagons and pickups have the driveshaft-mounted e-brake? Also, were the 3.34 first gears only in the pickup version?
     
    w3srl, Nov 8, 2005
    #6
  7. Nov 8, 2005
    Gump

    Gump Old Timer

    Bethel, CT
    Joined:
    Jun 1, 2004
    Messages:
    236
    Steve,

    I use a guy down the road from you for everything, www.walcks4wd.com . Use the phone also with him, I don't think he does e-mail. He also has a 2A and knows them well.
     
    Gump, Nov 8, 2005
    #7
  8. Nov 8, 2005
    wayneo99

    wayneo99 New Member

    Joined:
    Nov 1, 2005
    Messages:
    19
    wayneo99, Nov 8, 2005
    #8
  9. Nov 8, 2005
    willysworker

    willysworker Member

    Joined:
    Oct 12, 2003
    Messages:
    172
    I've been told the 4 cyl. trucks had the low 1St. gear. My orig. '55 226 wagon did not have T.C. E-brake. I believe CJ's where the only ones. please don't quote me. just trying to help and I'm not an expert. good luck.
     
    willysworker, Nov 8, 2005
    #9
New Posts