1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Saginaw Steering Shaft Support

Discussion in 'Builds and Fabricators Forum' started by Jrobz23, Apr 27, 2017.

  1. Apr 27, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    Do any of you guys run a setup with these? As I sit, I'm at the very upper bound of my column end single u-joint (likely over it). I'm debating switching to a double for the column end and looking for some examples of what you guys have run for supports. At present I do have the frame mounted dual master cyl kit (this likely will get yanked though), which somewhat complicates space for brackets.

    Photos are best. Share that wonderful welding work boys!
     
    Last edited: Apr 27, 2017
    Jrobz23, Apr 27, 2017
    #1
  2. Apr 28, 2017
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,189
    Steel Rod End, 3/4" ID
    Mine is not complete but like you I will be approaching the limits of a single u joint at the column. Above is the support I will use. I'm sure I've seen examples of this joint in use in the Saginaw PS thread in this section.
     
    Rich M., Apr 28, 2017
    #2
  3. Apr 28, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    Yeah, I'm looking at using the same piece.

    There were two examples in the thread (Tarry and Roto I think they were). It seems more tailored to the box itself. I'm just interested in the support and didnt wanna hijack.
     
    Jrobz23, Apr 28, 2017
    #3
  4. Apr 28, 2017
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784

    Post a couple of pictures of what you have now.........so we can better understand what you're trying to accomplish.
     
    tarry99, Apr 28, 2017
    #4
  5. Apr 30, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I'll try to get some tomorrow
     
    Jrobz23, Apr 30, 2017
    #5
  6. May 8, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I took the unit off to get some of the play out of it. Been doin other stuff too. I may snap some pics with it all back together.
     
    Jrobz23, May 8, 2017
    #6
New Posts