1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rolled It, Need Parts

Discussion in 'Intermediate CJ-5 and CJ-6 Classifieds' started by Candace, May 13, 2020.

  1. May 13, 2020
    Candace

    Candace Member

    La Verkin, Utah
    Joined:
    Jun 15, 2019
    Messages:
    59
    So unfortunately I rolled the Jeep :'(

    I am going to need springs, the two front fenders, a hood and a windshield. (with the frame thing around it, not just the glass)

    I have no idea where to even start looking. Can anyone help?

    It's a 1972 CJ5, V8
    All stock
     
  2. May 13, 2020
    timgr

    timgr Jeepin' Nerd 2020 Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    21,063
    Welcome to the flop club.

    What springs do you have now? Original, lift? How damaged? How many leaves?

    Many places sell the Dayton springs: https://www.rockauto.com/en/catalog/jeep,1972,cj5,5.0l+304cid+v8,1309430,suspension,leaf+spring,7544

    Hood and fenders are pretty easy - fenders and hood are mostly unchanged from '72 to the end of the CJ-5. Cheapest private-party, but I would also search here Car-Part.com--Used Auto Parts Market

    Windshield is harder. There are aftermarket replacements for the frame, but the quality is not good compared to original frames. You could try the search engine above, or buy an aftermarket frame and seal, and ask your local glass shop to put glass in it.
     
  3. May 13, 2020
    ITLKSEZ

    ITLKSEZ Volvophilic

    Post Falls, ID
    Joined:
    Aug 13, 2015
    Messages:
    4,300
    Timber Cruiser and Fireball like this.
  4. May 13, 2020
    Twin2

    Twin2 not him 2020 Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    4,198
  5. May 13, 2020
    givemethewillys

    givemethewillys Sponsor

    New Kent, VA
    Joined:
    Jun 21, 2005
    Messages:
    1,136
    I was just thinking the same thing, geeessshhh. I hope you're doing ok, it sounds like there isn't too much that you need to get it back on the road.
     
  6. May 13, 2020
    Richard in AZ

    Richard in AZ I just don't understand the like of patina 2020 Sponsor 2019 Sponsor

    PHX AZ
    Joined:
    Feb 22, 2016
    Messages:
    71
    I have some fenders, a hood and a grill which I believe are off an intermediate I would be willing to sell..... I have no idea how they could be shipped...

    PM me if interested...

    Richard
     
  7. May 15, 2020
    Renegade ll

    Renegade ll Member

    Thayne Wyoming
    Joined:
    Feb 17, 2013
    Messages:
    413
    Wouldn't this be better to have it in the Classified?
     
    Focker likes this.
  8. May 16, 2020
    Bostonbob

    Bostonbob Delta Colo

    Delta Colorado
    Joined:
    Jan 6, 2014
    Messages:
    106
    I have most of the parts in Delta Co
     
  9. May 17, 2020
    Bostonbob

    Bostonbob Delta Colo

    Delta Colorado
    Joined:
    Jan 6, 2014
    Messages:
    106
    My front fenders are not available s of now.
     

Share This Page

New Posts