1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear bumpers

Discussion in 'Early Jeep Restoration and Research' started by Ducks-Bass-n-Jeeps, Oct 29, 2004.

  1. Oct 29, 2004
    Ducks-Bass-n-Jeeps

    Ducks-Bass-n-Jeeps A Parade of One

    Brentwood, Tennessee
    Joined:
    Aug 11, 2003
    Messages:
    120
    What was the original rear bumper set up for a 64 CJ-5.

    I just took my rear winch off and weighing my options for what to put in its place.
     
  2. Oct 29, 2004
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    Original would have been a drawbar (the angled piece with holes for attachments) attached to the rear crossmember. Kinda neat looking, but hangs down a bit more than preferable for 'wheeling.
     
  3. Oct 29, 2004
    John A. Shows

    John A. Shows Comic Relief

    Mendenhall...
    Joined:
    Sep 24, 2002
    Messages:
    938
    Not even bumperettes? I thought those were at least an option.
     
  4. Oct 29, 2004
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Drawbar unless a Tux IIRC.
     
  5. Oct 29, 2004
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    The chrome bumpers (ala Tux) were available as an option on the intermediates. They're out there if you look long and hard.
     
  6. Oct 29, 2004
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    bumperettes origional on military and available on civilian IIRC they were used along with the drawbar.
     
New Posts