1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ps Pump Mount Question

Discussion in 'Early CJ5 and CJ6 Tech' started by Buildflycrash, Jun 23, 2018.

  1. Jun 23, 2018
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    maybe I have it upside down. I connected the two short bolts and got a 1/3” gap on the longer bolt mount. Seems like this is the only way the holes all line up.

    [​IMG]

    Here’s the gap.

    [​IMG]
     
  2. Jun 23, 2018
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,491
    Maybe the donor vehicle had a slightly different head casting???? Looks easy enough to correct with a couple of flat washers or a short spacer of some kind. What did the bracket come off of?
     
  3. Jun 23, 2018
    Bowbender

    Bowbender I'm workin' on it!

    Northern Minn.
    Joined:
    Nov 14, 2014
    Messages:
    561
    [​IMG]
    There is a bracket with your pump that goes in the gap.
     
    tarry99 likes this.
  4. Jun 23, 2018
    Bowbender

    Bowbender I'm workin' on it!

    Northern Minn.
    Joined:
    Nov 14, 2014
    Messages:
    561
    [​IMG]

    [​IMG]

    These show better
     
    Focker likes this.
  5. Jun 23, 2018
    Bowbender

    Bowbender I'm workin' on it!

    Northern Minn.
    Joined:
    Nov 14, 2014
    Messages:
    561
    I want your bracket :twist: ;)
     
  6. Jun 23, 2018
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Oh yes. I see. I do have the two parts that hold the pump.
     
  7. Jun 23, 2018
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Yeah, these are not easy to come by.
     
  8. Jun 24, 2018
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,356
    Search on car-part.com, that's where I found mine last year, off of a 70 skylark with the 350.
     
    Bowbender likes this.
  9. Jun 24, 2018
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,491
    Thank you. Is the pump from the same application or just the mount?
     
  10. Jun 24, 2018
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,356
    The pump, the pulley and stamped steel bracket came from a junkyard in Pa.

    What Did You Do To Your Jeep Today?

    the alum bracket came from the same make and model, but i got it through ebay.
     
  11. Jun 24, 2018
    Steve's 70-5

    Steve's 70-5 Active Member

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,381
    That's a high mount PS Bracket?
     
  12. Jun 24, 2018
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Here’s the update. The pump is mounted and the steering gear is in place. The pulley doesn’t line up at all. I’ll have to make some spacers this week.

    [​IMG]
     
  13. Jun 24, 2018
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,169
    I've been through this. There are at least 3 different pulleys depending on application/ donor vehicle. I don't know if the nut type pumps accept the press on style pulleys. Lots of help huh?
     
    Buildflycrash likes this.
  14. Jun 25, 2018
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Yes helpful would be sending me the correct pulley.
     
  15. Jun 25, 2018
    Oldriginal86

    Oldriginal86 Member

    Pasadena, Md.
    Joined:
    Nov 5, 2014
    Messages:
    589
    The pump and resovoir can be separated. You could install a later pump with a press-on pulley into that can. It would open up more possibilities. Is the period correct pump just like the one you have or is it a press fit.
     
New Posts