1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need to seal tranny leak. Cluster gear shaft

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Sep 16, 2004.

  1. Sep 16, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    Well i installed the T18 and noticed i had a leak coming from it... and i didnt even get to drive it yet.

    I took the bellhousing off and the leak turns out to be from the cluster gear shaft in the bottom of the case. i thoguht i put some sealant on it when i pressed it in, but i guess not. So i have a leak. What is the est way to seal this?? I can clean it good and try to RTV to seal it, but i do not know how long term that will last. How would you guys reseal it?? what sealant to use??
     
  2. Sep 16, 2004
    dg69

    dg69 New Member

    left coast
    Joined:
    Sep 13, 2004
    Messages:
    23
    had a similar problem with the intermediate shaft on the transfer case. was able to seal it up with the black rtv. works for me!!! :p
     
New Posts