1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need help from a Flattie guy

Discussion in 'Flat Fender Tech' started by captain cj, Dec 11, 2005.

  1. Dec 11, 2005
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    I am trying to determin if I received the wrong rear floor pan for my 65 cj-5 could one of you gents give me the measurement of the lenth, front to back of your rear floor pan. The one I received is about 2 " to short.
    Thanks Steve
     
    captain cj, Dec 11, 2005
    #1
  2. Dec 11, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    My Cj-2A measures just about 39 1/4" from the outside ofthe rear lip to the "kickup" under the driver's seat. Keep in mind that I replaced my rear floor panel, so my measurements may be off a smidge from the factory spec.

    Does this help you out?
     
    w3srl, Dec 11, 2005
    #2
  3. Dec 11, 2005
    captain cj

    captain cj Member

    Crystal Beach...
    Joined:
    Sep 27, 2005
    Messages:
    331
    Thanks Steve thats exactly what I needed they sent me a panel for a 2A the measurement for my cj-5 is 42 1/4. Now all I have to do is get them to swap it out ther e goes a couple weeks of time at least.
    Thanks Steve
     
    captain cj, Dec 11, 2005
    #3
New Posts