1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

metallic rub in bellhousing

Discussion in 'Intermediate CJ-5/6/7/8' started by a72cj, Apr 24, 2007.

  1. Apr 24, 2007
    a72cj

    a72cj Member

    B.C. Canada
    Joined:
    Jan 3, 2004
    Messages:
    55
    Any ideas what would cause a metallic grinding noise that seems to be coming from the bellhousing. (258 engine T14a tranny) I first noticed it when I drove down a steep bank. I don't think it is the throw out bearing because the noise is there when the clutch is engaged or released.
     
    a72cj, Apr 24, 2007
    #1
  2. Apr 24, 2007
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Worn clutch disc? (Rivets scraping the flywheel)
     
    jayhawkclint, Apr 24, 2007
    #2
  3. Apr 24, 2007
    73cj5

    73cj5 Member

    Maine
    Joined:
    Jan 15, 2004
    Messages:
    904
    Clutch cover scraping flywheel, Starter gear on flywheel ring gear?
     
    73cj5, Apr 24, 2007
    #3
  4. Apr 24, 2007
    a72cj

    a72cj Member

    B.C. Canada
    Joined:
    Jan 3, 2004
    Messages:
    55
    Thanks guys. I don't think it is a warn clutch because the noise is there at all times. I'm leaning towards the starter or clutch cover plate. I guess if it's not the starter i will have to drop the transmisssion as I can't see any thing from the outside.
     
    a72cj, Apr 24, 2007
    #4
New Posts