1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Measurement Help Needed

Discussion in 'Early CJ5 and CJ6 Tech' started by WestCoastPat, Jan 1, 2020.

  1. Jan 1, 2020
    WestCoastPat

    WestCoastPat Member

    Joined:
    Nov 1, 2015
    Messages:
    119
    I am trying to complete a full refurbishment of a Sparton SCS-3r Turn Signal Unit like you would find in a 1969 CJ5. It seems like the two spring steel wire clamps that hold the wire bundle to the steering column are basically not available. I would sure like to find a source for them and I might have an answer. If someone would be so kind as to measure the diameter of the steering column I could compare it to a spring steel wire clamp that I found. Thanks. WestCoastPat
     
  2. Jan 2, 2020
    CJMark

    CJMark Jeeper

    Spearfish, SD
    Joined:
    Mar 7, 2014
    Messages:
    85
    [​IMG]



    [​IMG]
     
    Beach66Bum and Glenn like this.
  3. Jan 2, 2020
    WestCoastPat

    WestCoastPat Member

    Joined:
    Nov 1, 2015
    Messages:
    119
    Many thanks for your help. I found something about the right shape while reading a post about windshield wipers. I will call the people that had them and see if they can measure them or if not I will just spend the $5.95 and buy one for the heck of it. Thanks again. WestCoastPat
     

Share This Page

New Posts