1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Master Cylinder Measurement(s)?

Discussion in 'Intermediate CJ-5/6/7/8' started by mruta, Feb 23, 2007.

  1. Feb 23, 2007
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422
    Would anyone mind taking a couple measurements on their intermediate for me? I'm trying to find the "right spot" to install intermediate pedals on my M38A1. I'm using the factory A1 dash panel and when I line the pedal bracket up with the dash, I think it would put the master cylinder too high on the firewall. I was wondering if someone could give me the measurement from the center of the MC mounting holes to somewhere above on the firewall. Anyone? The :beer: :beer: :beer: is on me!

    Thanks!
     
  2. Feb 23, 2007
    mikieboy

    mikieboy Member

    Jacksonville, FL
    Joined:
    Mar 21, 2005
    Messages:
    155
    Send :beer: :beer: :beer: first.......
     
New Posts