Lower Low Range Take 2

Well back at it again. On the last day of EJS I heard a noise in the front drive line of the jeep about half way up Moab rim. After getting it home and some inspecting it turns out I knocked 1 tooth of the front drive input gear(the Bronco Dana 20 part). Fortunately I have a few of these cases yet that I have acquired over the years.

I'm showing this pic of an old crusty Bronco 20 case to give reference for those looking for the correct one. What you need to look for is a T style handle for the shifter. If there is no handle on it look at the shift rails. They will have a slot and a pin like this. Some might even have the shifter bracketry on it yet. The main thing is if the rails have a welded bracket on each one it will be to new. If the case is separated from the trany you can also count the teeth. You need 33 of them.