1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Little Tips And Tricks

Discussion in 'The Tool Shed' started by TIm E, Oct 26, 2018.

  1. Oct 26, 2018
    TIm E

    TIm E Aggressively average

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    683
    Wasn't sure where to post this, so feel free to move it if needed...

    Quite a bunch of industrious and inventive folks here (kind of have to be working on these old Jeeps). I am sure there is a wealth of knowledge as it relates to little tips and tricks, feel free to share your ingenuity here...

    Nothing earth shattering, but I'll start...

    The concave bottom of a soda or beer can makes a nice little dish for mixing up a typical amount of epoxy, JB Weld, touch-up paint, small amount of grease or oil for assembly, etc. Pull the tab off so it sits level on a surface and/or crush it down so it is not so "top" heavy. OR, use a full one and drink the beer after to celebrate your accomplishment! (y)

    Free, readily available, durable and disposable/recycle-able.
     
    Bowbender, Walt Couch, Focker and 2 others like this.
  2. Oct 26, 2018
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    Thats an awesome idea!
     
    ITLKSEZ likes this.
  3. Oct 26, 2018
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Liberty Lake, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,656
New Posts